您现在的位置是：首页 >技术交流 >configure网站首页技术交流

#
# Recommended minimum configuration:
#

# Example rule allowing access from your local networks.
# Adapt to list your (internal) IP networks from where browsing
# should be allowed

acl localnet src 10.0.0.0/8    # RFC1918 possible internal network
acl localnet src 172.16.0.0/12    # RFC1918 possible internal network
acl localnet src 192.168.0.0/16    # RFC1918 possible internal network
acl localnet src fc00::/7       # RFC 4193 local private network range
acl localnet src fe80::/10      # RFC 4291 link-local (directly plugged) machines

acl SSL_ports port 443
acl Safe_ports port 80        # http
acl Safe_ports port 21        # ftp
acl Safe_ports port 443        # https
acl Safe_ports port 70        # gopher
acl Safe_ports port 210        # wais
acl Safe_ports port 1025-65535    # unregistered ports
acl Safe_ports port 280        # http-mgmt
acl Safe_ports port 488        # gss-http
acl Safe_ports port 591        # filemaker
acl Safe_ports port 777        # multiling http
acl CONNECT method CONNECT

#
# Recommended minimum Access Permission configuration:
#

# Only allow cachemgr access from localhost
http_access allow localhost manager
http_access deny manager

# Deny requests to certain unsafe ports
http_access deny !Safe_ports

# Deny CONNECT to other than secure SSL ports
http_access deny CONNECT !SSL_ports

# We strongly recommend the following be uncommented to protect innocent
# web applications running on the proxy server who think the only
# one who can access services on "localhost" is a local user
#http_access deny to_localhost

#
# INSERT YOUR OWN RULE(S) HERE TO ALLOW ACCESS FROM YOUR CLIENTS
#

# Example rule allowing access from your local networks.
# Adapt localnet in the ACL section to list your (internal) IP networks
# from where browsing should be allowed
http_access allow localnet
http_access allow localhost

# And finally deny all other access to this proxy
http_access allow all

# Squid normally listens to port 3128
http_port 13128

# Uncomment the line below to enable disk caching - path format is /cygdrive/<full path to cache folder>, i.e.
#cache_dir aufs /cygdrive/d/squid/cache 3000 16 256

# Leave coredumps in the first cache dir
coredump_dir /var/cache/squid

# Add any of your own refresh_pattern entries above these.
refresh_pattern ^ftp:        1440    20%    10080
refresh_pattern ^gopher:    1440    0%    1440
refresh_pattern -i (/cgi-bin/|?) 0    0%    0
refresh_pattern .        0    20%    4320

dns_nameservers 8.8.8.8 8.8.4.4

max_filedescriptors 3200

; Sample stunnel configuration file for Win64 by Michal Trojnara 2002-2023
; Some options used here may be inadequate for your particular configuration
; This sample file does *not* represent stunnel.conf defaults
; Please consult the manual for detailed description of available options

; **************************************************************************
; * Global options                                                         *
; **************************************************************************

; Debugging stuff (may be useful for troubleshooting)
;debug = info
;output = stunnel.log

; Enable FIPS 140-2 mode if needed for compliance
;fips = yes

; Microsoft CryptoAPI engine allows for authentication with private keys
; stored in the Windows certificate store
; Each section using this feature also needs the "engineId = capi" option
;engine = capi
; You also need to disable TLS 1.2 or later, because the CryptoAPI engine
; currently does not support PSS
;sslVersionMax = TLSv1.1
; TLSv1.1 requires security level 0 when compiled OpenSSL 3.0 and later
;securityLevel = 0

; The pkcs11 engine allows for authentication with cryptographic
; keys isolated in a hardware or software token
; MODULE_PATH specifies the path to the pkcs11 module shared library,
; such as softhsm2-x64.dll or opensc-pkcs11.dll
; IMPORTANT: A 64-bit stunnel requires 64-bit PKCS#11 modules
; Each section using this feature also needs the "engineId = pkcs11" option
;engine = pkcs11
;engineCtrl = MODULE_PATH:softhsm2-x64.dll
;engineCtrl = PIN:1234

; **************************************************************************
; * Service defaults may also be specified in individual service sections  *
; **************************************************************************

; Enable support for the insecure SSLv3 protocol
;options = -NO_SSLv3

; These options provide additional security at some performance degradation
;options = SINGLE_ECDH_USE
;options = SINGLE_DH_USE

; **************************************************************************
; * Include all configuration file fragments from the specified folder     *
; **************************************************************************

;include = conf.d

; **************************************************************************
; * Service definitions (at least one service has to be defined)           *
; **************************************************************************

; ***************************************** Example TLS client mode services

; ***************************************** Example TLS server mode services

[squid-proxy]
accept = 13129
connect = 13128
cert = stunnel.pem
 

; Sample stunnel configuration file for Win64 by Michal Trojnara 2002-2023
; Some options used here may be inadequate for your particular configuration
; This sample file does *not* represent stunnel.conf defaults
; Please consult the manual for detailed description of available options

; **************************************************************************
; * Global options                                                         *
; **************************************************************************

; Debugging stuff (may be useful for troubleshooting)
;debug = info
;output = stunnel.log

; Enable FIPS 140-2 mode if needed for compliance
;fips = yes

; Microsoft CryptoAPI engine allows for authentication with private keys
; stored in the Windows certificate store
; Each section using this feature also needs the "engineId = capi" option
;engine = capi
; You also need to disable TLS 1.2 or later, because the CryptoAPI engine
; currently does not support PSS
;sslVersionMax = TLSv1.1
; TLSv1.1 requires security level 0 when compiled OpenSSL 3.0 and later
;securityLevel = 0

; The pkcs11 engine allows for authentication with cryptographic
; keys isolated in a hardware or software token
; MODULE_PATH specifies the path to the pkcs11 module shared library,
; such as softhsm2-x64.dll or opensc-pkcs11.dll
; IMPORTANT: A 64-bit stunnel requires 64-bit PKCS#11 modules
; Each section using this feature also needs the "engineId = pkcs11" option
;engine = pkcs11
;engineCtrl = MODULE_PATH:softhsm2-x64.dll
;engineCtrl = PIN:1234

; **************************************************************************
; * Service defaults may also be specified in individual service sections  *
; **************************************************************************

; Enable support for the insecure SSLv3 protocol
;options = -NO_SSLv3

; These options provide additional security at some performance degradation
;options = SINGLE_ECDH_USE
;options = SINGLE_DH_USE

; **************************************************************************
; * Include all configuration file fragments from the specified folder     *
; **************************************************************************

;include = conf.d

; **************************************************************************
; * Service definitions (at least one service has to be defined)           *
; **************************************************************************

; ***************************************** Example TLS client mode services

[squid-proxy]
client = yes
accept = 127.0.0.1:13128
connect = server:13129
verifyChain = yes
CAfile = stunnel.pem  //要用服务器的证书

; ***************************************** Example TLS server mode services